Customization: | Available |
---|---|
Light Source: | LED Light |
Color Temperature(CCT): | Cool White |
Still deciding? Get samples of US$ 80.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Input voltage | AC 100-240V | ||
Freqency range | 50HZ-60HZ | ||
Power factor | >0.95 | ||
Chip brand | 3030(many brand) | ||
Power brand | many brand | ||
LED quantity | 50W (R07-15) | 1 module | 64 PCS |
100W (R07-110) | 2 module | 128 PCS | |
150W (R07-115) | 3 module | 192 PCS | |
200W (R07-120) | 4 module | 256 PCS | |
250W (R07-125) | 5 module | 320 PCS | |
300W (R07-130) | 6 module | 384 PCS | |
System light effect | 130-140 lm/W | ||
Power efficiency | >90% | ||
Color temperature | 2700-6500K | ||
Color rendering index | Ra≥70 | ||
Light distribution | Symmetry light distribution | ||
Light design | Lens light distribution | ||
LED Junction temperature | ≤ 90ºC | ||
Working temperature | -30ºC - +50ºC | ||
Storage temperature | -30ºC - +50ºC | ||
IP Grade | IP65 | ||
Working life-span | >50,000H | ||
Power connection line | Brown | L | |
Blue | N | ||
Yellow/Green | G | ||
Color of lamp shell | DOUBLE GRAY /Black / Silver | ||
Support tube diameter | 50-60W (R07-15) | D60mm | |
100W (R07-110) | D60mm | ||
150W (R07-115) | D60mm | ||
200W (R07-120) | D60mm | ||
250W (R07-125) | D60mm | ||
300W (R07-130) | D60mm | ||
Lamp weight :N.W./ G.W. | 50W (R07-15) | ||
100W (R07-110) | |||
150W (R07-115) | |||
200W (R07-120) | |||
250W (R07-125) | |||
300W (R07-130) | |||
L(MM) | W(MM) | H(MM) | |
Product size (R07-15) | 638 | 371 | 140 |
Product size (R07-110) | 718 | 371 | 140 |
Product size (R06-115) | 798 | 371 | 140 |
Packing size (R06-120) | 878 | 371 | 140 |
Packing size (R06-125) | 958 | 371 | 140 |
Packing size (R06-130) | 1038 | 371 | 140 |
Road lighting: It is mainly applied to the road lighting of urban expressway,secondary trunk road, branch road, factory, school, garden, various residential communities and courtyards. The installation height is 6-13m and the installation torque is 16Nm.
IP66 waterproof/dust proof/explosion proof/IK09.
Aluminum shape good at heat dissipation.
The lamp post can be adjusted to plus or minus 15 degrees ,It can also be installed vertically.
SMD 3030/ 5050/ Ra>70/SDCM<6.
100,000 times switching cycle before failure.
Total harmonic distortion(THD)<10%.
Excellent post light control design, the whole lamp can achieve T II-M, T III-M.
Pass 3G vibration test.
Easy to install.
Strong system expansion ability and increase sensor devices.
Low power consumption, large capacity , high stability.
Before installing the lighting fixtures, please read this instruction manual carefully.
The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations.
Lamps should always be installed or replaced carefully.
Please check the local voltage in accordance with the product requirements before installation.
Revamping only can be done when the power is off and the lamp is completely cooled down.
When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly.
Don't cover the fixtures with flammable materials.
Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.