Die Cast Aluminiumdecorative Street LED Pole Light 150W LED Road Lamp Streetlight Outdoor Pole Street Lamp

• Customization: Available
• Light Source: LED Light
• Color Temperature(CCT): Cool White
• Model NO.: SLR31-150W
• Lamp Body Material: Aluminum
• Lamp Power: 150W
• Power Supply: AC
• Average Life: >50000h
• Application: Highway, Square, Garden
• IP Rating: IP66
• Certification: CE, RoHS
• Voltage: 100-277V
• Power Efficiency: >0.90
• Color Temperature: 3000-6500K
• Warranty: 5 Years
• CRI: >70
• LED Qty (PCS): 224
• Lens(PCS): 1
• Lumen: 100--130 Lm/W
• Specification: 48*18*10cm
• Trademark: sunle
• Origin: Ningbo
• Production Capacity: 10000pieces/Year

Product Description

Model NO.	Power(W)	Light Source	LED QTY (PCS)	Lens(PCS)	CCT(K)	Lumen (4000K@lm/W)	CRI
R31-15-50W	50	2835	72	1	3000-6500k	90-110	>70
R31-110-100W	100	2835	144	1	3000-6500k	90-110	>70
R31-115-150W	150	2835	224	1	3000-6500k	90-110	>70

Application site
City road / tunnel lighting 
Commercial lighting control 
Solar street smart lighting control
Features
IP66 waterproof/dust proof/explosion proof/IK09
Aluminum shape good at heat dissipation
The lamp post can be adjusted to plus or minus 15 degrees
It can also be installed vertically
SMD 3030/ 5050/ Ra>70/SDCM<6
100,000 times switching cycle before failure
Total harmonic distortion(THD)<10%
Excellent post light control design, the whole lamp can achieve T II-M, T III-M,That's our advantage
Pass 3G vibration test
Advantage
Easy to install
Strong system expansion ability and increase sensor devices
Low power consumption, large capacity , high stability
Matters needing attention 
Before installing the lighting fixtures, please read this instruction manual carefully. 
The lighting fixtures should be installed, connected and tested by a certified electrician based on the local regulations. 
Lamps should always be installed or replaced carefully. 
Please check the local voltage in accordance with the product requirements before installation. 
Revamping only can be done when the power is off and the lamp is completely cooled down. 
When clean the lamp, make the power off and let it cool down completely, clean the fixture with a soft cloth and a standard PH neutral detergent, stainless steel should be maintained regularly. 
Don't cover the fixtures with flammable materials. 
Replace should be made by the manufacturer or his service agent or certified electrician in order to avoid a hazard.